Workstation and Hardware Setup
How to Install Pole Display (Bixolon, Partner)
Bixolon BCD-1000/1100 (COM) 1. Connect the device to your PC via COM (PC should be equipped with COM Port) 2. Download drivers: https://www.bixolon.com/download_view.php?idx=78 3. Start an installation process. 4. Make sure to select the correct ...
How to Setup Receipt Layout: Epson TM-T88 Series Printer
Depending on Windows version and Windows settings there is a need to adjust POS receipt layout in order to have receipt info Fit the receipt Go to Control Panel > Devices and Printers highlight receipt printer and click on Print server properties at ...
How to Setup Receipt Layout: Star TSP 100 Series Printer
After the printer is installed, you need to make sure that the correct page layout is set on a printer for POS receipts: Open up Control Panel > Devices and Printer Right mouse click on installed printer > Printer Properties Go to Preferences Go ...
How to Setup Epson TM-T88IV (Legacy Printer Model) Printer
In order to download Pinter drivers, please visit official manufacturer's web page: https://epson.com/Support/Point-of-Sale/Thermal-Printers/Epson-TM-T88IV-%28Legacy-Product%29/s/SPT_C31C636084 Go to Downloads > Select your operating system > click ...
How to Setup Citizen CT-S310 Series Printer
Please follow the link http://www.citizen-systems.com/en/printer/support/software/POS?field_software_printers_target_id=79&field_operation_system_tid=All Proceed with a selection of Printer Model and Operating system Continue with driver ...
How to Setup Star TSP100 Series Printer
In order to start, please follow the official web page link in order to download Printer drivers. Download page: http://www.starmicronics.com/support/default.aspx?printercode=tsp100 Select a model that you have Select the latest version of the driver ...
How to Setup Epson TM-T88 Series Printer
In order to download Pinter drivers, please visit the official manufacturer's web page: For TM-T88V - https://ftp.epson.com/drivers/pos/TM-T88V_APD_5.11R1.exe ...
How to Configure PAX S300
Step 1: Connecting your PAX S300 unit Connect the power supply cable to the hub on the connector cable. Connect one end of the Ethernet cable to the Red land port on the connector cable. Then connect the other end of the Ethernet cable to an open ...
Recommended Workstation Configuration
Platforms Microsoft Windows 10 / 11 Pro RAM 4Gb (recommended) 6Gb (optimal) Processor Dual Core Intel Pentium 2.2GHz (recommended) Quad Core Intel 3.0 GHz (optimal) Hard disk 10Gb available hard disk space Software Microsoft .Net Framework is ...
List of Supported Hardware
The following list of hardware has been officially approved to work with your POS. Other devices may successfully work with the system but their compatibility has not been thoroughly tested. Printers Star For more details, please ...
How to Set Up a POS Printer
These instructions are provided as general guidelines for installing a POS receipt printer. The actual steps for your device might happen in a slightly different order, include additional or fewer steps, or vary in other ways. Consult the ...