How to Configure PAX S300

How to Configure PAX S300

Step 1: Connecting your PAX S300 unit

Connect the power supply cable to the hub on the connector cable.

Connect one end of the Ethernet cable to the Red land port on the connector cable. Then connect the other end of the Ethernet cable to an open port of your router.

* Make sure that your PC and PAX S300 device are connected to the same router

Step 2: Checking the IP address on your PAX S300

Once the PAX S300 is turned on, hit Menu button (or press and hold button 1 and Func) à Communication à LAN Parameters à IP Address

Small hint: while rebooting PAX S300, the correct IP address would be displayed for a few seconds on the top of the screen.


Step 3: Configuration with the POS system

- On a login screen, hit Configure button.

(If you are already logged in to the software, go to File tab at the top and then Configuration)

- Switch to the second tab POS equipment - In Pin Pad area, select “PAX (S300/D210)”.

-Enter S\N of PAX terminal (might be found on the back panel, 8 digit number).

- Press Apply and then OK at the bottom.

Make sure to restart the POS software

    • Related Articles

    • How to Setup Epson TM-T88 Series Printer

      In order to download Pinter drivers, please visit the official manufacturer's web page: For TM-T88V - ...
    • List of Supported Hardware

      The following list of hardware has been officially approved to work with your POS. Other devices may successfully work with the system but their compatibility has not been thoroughly tested.   Printers Star For more details, please ...
    • Lista de hardware compatible

      La siguiente lista de hardware ha sido aprobada oficialmente para funcionar con su TPV. Es posible que otros dispositivos funcionen correctamente con el sistema, pero su compatibilidad no se ha comprobado exhaustivamente. Impresoras Star Para más ...
    • How to Setup Star TSP100 Series Printer

      In order to start, please follow the official web page link in order to download Printer drivers. Download page: Select a model that you have Select the latest version of the driver ...
    • How to Install Pole Display (Bixolon, Partner)

      Bixolon BCD-1000/1100 (COM) 1. Connect the device to your PC via COM (PC should be equipped with COM Port) 2. Download drivers: 3. Start an installation process. 4. Make sure to select the correct ...